Motorola Atrix setup - setting up ClockWorkMod backup

By Tim Naylor -
Prerequisits:
  • Motorola fastboot (win32/64 or osx depending on your os of choice)
  • Android sdk installed and adb working
  • proper drivers for your device installed.
  • ROOTED Atrix 4g
Assuming all of that is done there are a few setup steps necessary to enable your device to speak to adb:
  1. Plug in phone via micro USB cable, wait until it is recognized by the OS.
  2. On the phone, pull down the alert menu and choose USB connection
  3. Make sure that "NONE" is selected
  4. Open settings->applications->Development
  5. Make sure that USB debugging is checked
Installing ClockWorkMod

This nmod allows you to back up your phone and recover it gracefully it is essential if you are going to do any development or hacking of your device.
  1. Download the latest version from tenfar here http://forum.xda-developers.com/showthread.php?t=1019143
  2. cd to your adb folder and adb install MOTOA4_Bootstrap_###_###-signed.apk (update the numbers appropriately).
  3. Once installed, on the device, open the app tray and find "system recovery"
  4. Press the "Install Recovery" button
  5. After a few seconds, you will recieve a message that says "Install Success!" click "OK".
  6. Now PLUG YOUR PHONE INTO THE AC CHARGER.
  7. IT WILL NOT WORK PLUGGED INTO A USB PORT
  8. NO REALLY< THE AC WALL CHARGER PLUGGED IN!
  9. Click on "recovery boot" and enjoy all your favorite CWM functions

Comments

Post a Comment

Popular posts from this blog

HomeAssistant via docker on a Mac

By Tim Naylor -
Several weeks ago I switched to docker on a mac mini under ubuntu server.  I saw in the forums some people wanting to do it on OSX and I was about to write this article so I agreed to do it on OSX instead of Alpine Linux. It did not go as planned. I ran into significant issues, but today I sat down to get it working. Then I found out that someone had already updated the documentation here:  https://www.home-assistant.io/docs/installation/docker/ so that should be the source of truth. Hopefully this will be a little more straight forward since there is no intermingling with other operating systems and some assumptions in the documentation are called out expressly. First download docker here  https://store.docker.com/editions/community/docker-ce-desktop-mac you will have to create an account in order to do so. Once installed, fire up docker for the first time (from the applications directory, or launcher). follow the instructions in the wizard and log in with your docker accou
Read more

Flashing my tuya switches with tasmota

By Tim Naylor -
Image
This was an exciting adventure. I got these switches for $10 from someone who failed to make them work at their own house. They are JMH CD303 Tuya switches.  You can get them on Alibaba here:  https://www.alibaba.com/product-detail/2018-US-Smart-Switch-WiFi-Tuya_60764782124.html?spm=a2700.details.maylikever.8.287e3376iYLvTg  Initially I was just going to use the https://github.com/clach04/python-tuya method to integrate these into HA with local support. but then I got looking at that chip and it looked like an ESP8266, so I did a little digging. I was able to flash the Tuya TYWE3S module with Tasmota. Travis from digiblurDIY updated the Tasmota wiki with all the relevant information: I soldered up my TYWE3S just like he did here: The switches work perfectly with following settings: They need to be set to switchmode# 3 in order to maintain the state.  Switchmodes 0-2 acted like switchmode 7 usually does. With some tiny tweaks to the housing, it fits sideways
Read more

How I put Tasmota on my NodeMCU board and why I love them so much.

By Tim Naylor -
Image
I love NodeMCU chips! I love that everything is already there: wifi, enough onboard memory to actually do stuff, easily programable with Arduino ide once you have a driver (driver downloads here: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers ), and my favorite part, you can power them with anything from 3.3-12 volts so lots of power supplies work for them. I especially love the 12E or the 1.0 it is a little narrower, fits on a breadboard, super convenient! So far the only downside is that the output is only 3.3 volts (but that is true of all of the esp8266 boards), and the pins can be a little confusing ... D4 is GPIO2 which is pulled high at boot, and will cause boot failure if something is pulling it low at boot ... just lots of stuff to remember  HMMM that feels like another article in the making, for now here's the gist: What did I do to get it up and going? Verify prerequisites Install Arduino IDE Install Git In
Read more